
Finding your suitable readers for shark bite ice maker valve is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for shark bite ice maker valve including detail information and customer reviews. Let’s find out which is your favorite one.
786 reviews analysed
1. SharkBite 24983A Service Tee Stop Valve, 1/2 inch x 1/2 inch x 1/4 inch, Quarter Turn, Compression Service Stop Fitting, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT
Feature
- INSTALLS IN SECONDS: 1/2″ x 1/2” x 1/4″ threaded compression tee shut off valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal
- PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications
- COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
- RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
Description
CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.
We use high quality DZR Lead Free Brass for our 1/2” x 1/2” x 1/4” 1/4 Turn Tee Stop Valve. Chrome plated valve for an attractive appearance. This SharkBite Tee Stop allows you to easily and effortlessly tap into a current or new plumbing line and run a 1/4” compression line out to an end fixture. Makes it easy to add a humidifier, dishwasher, ice maker, faucet installation or toilet installation to a new or existing line. Alternatively, can be used as a saddle valve.
Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
SHARKBITE
SharkBite is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.
2. SharkBite 23336-0000LF Shut Off Water Valve, 1/2" x 1/4", Angle
Feature
- INSTALLS IN SECONDS: 1/2 inch push-fit x 3/8 inch threaded compression angle shut off valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal
- PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications
- COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
- RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
3. Sharkbite 25032A Ice Maker Outlet Box, 1/2 inch x 1/4 inch Compression, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe
Feature
- INSTALLS IN SECONDS: Ice Maker Box requires no special tools, no soldering, no crimping, unions or glue. Just push to create a watertight seal to the SharkBite fitting
- COPPER, PEX, CPVC: SharkBite fittings fit copper tubing, CPVC, PEX or PE-RT pipe in any combination
- LEAD FREE COMPLIANT: DZR lead free brass SharkBite valves
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
Description
The SharkBite Ice Maker Outlet Box is integrated with SharkBite push-to-connect ends to allow for quick and easy installation of a water main supply and shutoff for refrigerator ice maker and water dispenser appliances using Copper, PEX, CPVC, or PE-RT water lines. This is lead-free compliant and is offered with or without integral water hammer arrestors for water shockwave prevention. The box can be mounted to the left or right of the stud bay and needs no additional support framing. The snap-on faceplate accommodates up to 3/4″ drywall. 1/2″ SB X 1/4″ Compression Can be used with copper, cpvc or pex lines Decease the time & effort needed to connect water distribution pipe, no glue, soldering or crimping needed Simply cut your pipe, deburr, mark the pipe approximately 1″ For proper insertion depth, install pipe to proper depth Use behind your refrigerator, ice maker, or water dispenser to provide a clean installation & allow for easy shut off Includes the ice maker outlet box Faceplate cover, 2 support brackets.
4. SharkBite 25024 Plumbing Installation Kit
Description
The SharkBite ice maker installation kit has everything you need to install the water supply to your ice maker. The kit includes 1 SharkBite 1/2 in. Service slip tee, one 1/2 in. X 1/4 in. (3/8 in. O.D.) push-to-connect angle stop valve, a 10 ft. Coil of 1/4 in. Pex pipe, one 1/4 in. (3/8 in. O.D.) SharkBite x 1/4 in. O.D. Compression connector, and a 1/2 in. And 1/4 in. Disconnect clip to remove the pipe from the fitting if needed. The SharkBite service slip tee allows you to remove up to 2 in. Of your existing copper or cpvc line and add an angle supply stop valve. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included 10 ft. Pex coil connects to the push-to-connect angle stop valve 1/4 in. Outlet and the 1/4 in. Ice maker connector which will thread onto your ice maker. The pipe can be cut to the exact length needed so there is no excess supply line to coil providing a clean, tangle free look.
5. Eastman 60233 PEX Pre-assembled Ice Maker Outlet Box, 1/2 Inch Crimp PEX Connection with Installed 1/4-Turn Ball Valve, White
Feature
- CONNECTION: 1/2 inch Crimp PEX (F1807) Connection and 1/4-inch OD compression outlet
- DIMENSIONS: Rough opening of 5-3/4-inch W x 4-7/8-inch H x 3-1/2-inch D
- Faceplate Dimensions: 8-1/4-in w x 7-5/16-in H
- CONTENTS: Along with the ice maker box this pack includes a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover
- DESIGN: This outlet box is designed for recessed residential applications
- EASY INSTALLATION: One-piece design makes installation quicker and easier
Description
This Eastman 60233 Pex Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Crimp PEX inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.
The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).
6. SharkBite 23037-0000LFA Straight Stop Valve 1/2 inch x 3/8 inch, Compression Fitting, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT
Feature
- INSTALLS IN SECONDS: 1/2 inch push-fit x 3/8 inch threaded compression straight shut off valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal
- PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications
- COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
- RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
Description
Product Description
SharkBite 1/2″ X 3/8″ Compression Straight Stop Valve
We use high quality DZR Lead Free Brass for our 1/2” x 3/8” Quarter Turn Straight Stop Ball Valve. Chrome plated valve for an attractive appearance. Used where a water pipe enters a room allowing easy water shut off for maintenance, repair, installing a toilet pipe valve or faucet to your water system with no need to turn off your main supply valve.
CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.
Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
From the Manufacturer
SharkBite 23037-0000LF Straight Stop 1/2-Inch X 3/8-Inch Compression Lead Free
7. WATTS P-667 Ice Maker Tee Valve, 1/2-Inch Cts x 1/4-Inch Od
Feature
- 1/2 Cts x 1/2 Cts x 1/4 O.D. Quick connect tee valve for use with 1/2″ Copper, PEX, CPVC, polybutylene and 1/4″ O.D. Pex, polyethylene or copper Supply lines for ice makers and water connections
- Made from high quality materials and highly durable
- Manufactured in China
- Watts quick connect products are the easiest method on the market for joining copper, CPVC, and PEX (LDPE, MDPE, HDPE) tubing
- Plastic quick connect TEE with 1/2-Inch CTS on two sides with 1/4-Inch OD ball valve on third side
- Perfect for DIY pipe repair
- Approvals include FDA, ANSI/NSF-61, NSF-14, CSA B1375, ASTM F877, NSF-UP, and IAPMO ASSE 1061-2006
- Rated for 250psi at 75 degrees F and 100psi at 180 degrees F
Description
Product Description
1/2 CTS x 1/2 CTS x 1/4 O.D. quick connect tee valve for use with 1/2” copper, PEX, CPVC, and 1/4” O.D. PEX, polyethylene or copper supply lines for ice makers and water connections in refrigerators.
From the Manufacturer
This fitting incorporates stainless steel gripping teeth in the collets. These corrosion resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools. It works with copper, CPVC, and PEX (LDPE, MDPE, HDPE) tubing.
8. Metpure Ice Maker Fridge Installation Kit – 25′ Feet Tubing For Appliance Water Line With Stop Tee Connection and Valve For Quick Installation, 1/4" Fittings For Potable Drinking Water
Feature
- ◼️ COMPLETE ICE MAKER WATER LINE KIT: This kit comes complete with a 25′ white tubing, heavy duty brass universal adapter tee with 1/4″ shut off valve at the water supply end, and a 1/4″ quick connect adapter at the appliance connection end. This kit was put together by field technicians and plumbers to ease their onsite installation and now it is available to the general public.
- ◼️ SUPER DURABILITY: Linear low density polyethylene (LLDPE) line is extremely flexible, crack and impact resistant. It is the perfect material of choice for running fridge water line by professionals due to its high bendability, pliability, and yield that high density PEX line WILL NOT provide.
- ◼️ NO ODOR, NO BAD TASTE, AND NON-TOXIC: The tubing, certified by NSF ANSI 61 to ensure safety for potable drinking water, contains no toxic material and will leave no odor or plastic taste in the water. The heavy duty universal brass valve adapter is lead free to ensure the drinking water that passes through is safe and in compliance with the federal act of Low Lead Content in potable water.
- ◼️ EASY INSTALLATION: The installation is a breeze with Metpure ICEMK2514 Kit. The adapter universally fits both existing supply valve and line, saving you unnecessary trips to the hardware store for conversion adapters. Also the kit comes with a shut off valve so in case maintenance is needed, the water can be turned off with the valve. Moreover, the kit comes with a quick connect female adapter that you simply screw on the end of your point of use without any tools required.
- ◼️ VERSATILITY: This kit is great for a wide variety of applications. Connect at any water source with an existing water supply shut off valve & line and run the tubing to your freezer, refrigerator, ice maker, coffee brewer, water filtration inlet, humidifer, water dispenser, drinking fountain, and many more.
Description
Complete Metpure Ice Maker Fridge Installation Kit put together by field technicians and plumbers. This complete kit is field tested and approved by professionals to be installed as water line connection from an existing water supply valve & line to your point of use, such as a freezer, refrigerator, icemaker, water dispenser, humidifer, water filtration system, drinking fountain, coffee maker, and many more.
Will this kit work for my connection?
I like to connect this from my undersink water supply valve and line and run this to my fridge – YES.
I have a dedicated water supply valve behind my refrigerator and would like to use this kit to connect – NO.
I have an existing water filtration system, such as an RO system, and would like to split the filtered water into my fridge – NO.
I would like to connect this from an angle supply valve & line and connect to my ice maker – YES.
What’s included in the product?
QTY 1 roll: 25′ of 1/4″ OD white-colored NSF certified LLDPE tubing
QTY 1 package: Metpure EZROADP14 – includes 1/2″ x 3/8″ reducing nipple, 1/2″ x 3/8″ universal adapter tee, 1/4″ quick connect ball valve
QTY 1: 1/4″ female x 1/4″ quick connect adapter
QTY 1: installation manual
9. SharkBite 23037LFA4 Straight Stop Valve, 1/2 inch x 1/4 inch, Compression Fitting, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT, Pack of 4
Feature
- Installs in seconds: 1/2 inch push-fit x 3/8 inch threaded Compression Straight shut off valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal
- Performance: rated to 200 psi and 200 degree F. Use in potable water and hydronic heating applications
- Copper, pex, CPVC, pe-rt: SharkBite hose connector inlet fits Copper, pex, CPVC and pe-rt pipe and connects them in any combination
- Quality: only sharkbite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
- Residential and commercial: all SharkBite fittings meet the same standards for commercial and residential Plumbing applications
Description
4 Pack of SharkBite1/2″ X 3/8″ Compression Straight Stop ValveWe use high quality DZR Lead Free Brass for our 1/2” x 3/8” Quarter Turn Straight Stop Ball Valve. Chrome plated valve for an attractive appearance. Used where a water pipe enters a room allowing easy water shut off for maintenance, repair, installing a toilet pipe valve or faucet to your water system with no need to turn off your main supply valve.CUT. PUSH. DONE.The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
Conclusion
By our suggestions above, we hope that you can found Shark Bite Ice Maker Valve for you.Please don’t forget to share your experience by comment in this post. Thank you!