Top 10 Ice Maker Circuit Boards

0

Finding your suitable readers for ice maker circuit boards is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for ice maker circuit boards including detail information and customer reviews. Let’s find out which is your favorite one.

695 reviews analysed

1. Wadoy 4389102 Ice Maker Control Board Replacement for Whirlpool Kenmore W10757851 2198586 W10193840 ADC9102 Refrigerator Main Icemaker Sensor Kit

Wadoy 4389102 Ice Maker Control Board Replacement for Whirlpool Kenmore W10757851 2198586 W10193840 ADC9102 Refrigerator Main Icemaker Sensor Kit

Feature

Description

Product Description:
Ice maker optic board set 4389102 senses ice cube level in the ice bucket and shuts off ice production when the bucket is full. Set also prevents the ice maker from ejecting ice when you open the freezer door. Set includes emitter and receiver optic boards.

Note:
Replace original part numb Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your handsers

Fits:
4389102, AP3137510, W10290817, W10193840, W10193666, 4389102R, 4388635, 2255114, 2220402, 2220398, 2198586, 2198585

2. 4389102 Refrigerator Ice Maker Sensor Control Board Kit for Whirlpool Kenmore Kitchen Aid Maytag Jenn Air Replace # W10757851 AP5956767 W10193666 ADC9102 2198586 PS557945 AP3137510

4389102 Refrigerator Ice Maker Sensor Control Board Kit for Whirlpool Kenmore Kitchen Aid Maytag Jenn Air Replace # W10757851 AP5956767 W10193666 ADC9102 2198586 PS557945 AP3137510

Feature

Description

Super Exquisite and Durable Icemaker Control Board Kit

How To Test The Whirlpool Ice Maker Optic Control Boards 4389102
Diagnostics 1 : First, open the freezer door and look at the status LED on the right hand side. Make sure the ice maker control is turned “ON”. The status LED should blink twice, pause, and then repeat (blink blink…. pause. blink blink… pause).
Diagnostics 2 : Next, with the freezer door open, hold down the flapper door on the left hand side to un-block the optics beam. With the optics beam unblocked, the status LED should light up and stay on (not blink). If the status LED continues to blink twice, then you have faulty optic control boards and they will need to be replaced.
Diagnostics 3 : If there is no status LED light, then the ice maker could be in “harvest” mode. Hold down the freezer light switch, the status LED should flash every second while in harvest mode. If the LED light still does not light up, then the optic control boards will need to be replaced.

How To Replace The Whirlpool Ice Maker Optic Control Boards 4389102
Step1: First, unplug the refrigerator.Remove the three Phillips screws on the right hand side.
Step2: Disconnect the wire harness on the back side and then remove the two Phillips screws to release the receiver control board from the housing. Re-install the receiver board in the reverse order.
Step3: Next, remove the three Phillips screws on the left hand side.
Step4: Disconnect the wire harness on the top side and then remove the two Phillips screws to release the emitter control board from the housing. Re-install the emitter board in the reverse order.

Specification:
Brand: KONDUONE
Condition: 100% Brand New and never used
Package Includes:
1 x 4389102 Icemaker Sensor Control Board Kit with Instruction Manual

3. PrimeCo Supply New 4389102 W10757851 ADC9102 AP5956767 Ice Maker Control Board Kit for Whirlpool Emitter Sensor – 1 Year Warranty

PrimeCo Supply New 4389102 W10757851 ADC9102 AP5956767 Ice Maker Control Board Kit for Whirlpool Emitter Sensor - 1 Year Warranty

Feature

Description

Fits Refrigerators that ice cubes dump directly into ice bin in Freezer door.

4. ALEW Direct 4389102 Refrigerator Ice maker Emitter Sensor Control Board Kit, Ice Maker Control Board Kit Compatible with Whirlpool, and Durable, Replaces 2220398 ADC9102 AP3137510 PS55794

ALEW Direct 4389102 Refrigerator Ice maker Emitter Sensor Control Board Kit, Ice Maker Control Board Kit Compatible with Whirlpool, and Durable, Replaces 2220398 ADC9102 AP3137510 PS55794

Feature

Description

Package:
The ice maker whirlpool replacement kit includes an Emitter Board and a Receiver Board.
Compatible brand:
The refrigerator ice maker control board Kit Designed to fit specific Whirlpool manufactured refrigerator models,include:
Whirlpool,Kenmore,Maytag, Magic Chef, Amana, Admiral, Estate, Inglis, KitchenAid, Roper, Crosley, Jenn Air, Hardwick, Glenwood, and Caloric.
Replacement part Numbers:
The ice maker whirlpool replacement kit Replacement part Numbers,
 2198585 、2198586、 2198588、2220398、2220402、2255114、4388635、4389102 、4389102R、ADC9102 、AP3137510、 AP5956767 、PS557945 、PS10064583、TJ4389102R、 W10193666 、W10193840、W10290817、W10757851
The ice maker whirlpool replacement kit can solve problems:
(1) The ice maker does not make ice
(2) The ice maker does not distribute ice
(3) The ice maker won’t stop making ice
(4) The ice maker seems to have stopped working properly
Replacement and installation:
(1)Unplug the refrigerator and remove the three cross screws on the right side.
(2) Disconnect the wire harness on the back side and then remove the two screws to release the receiver control board from the housing.
(3) Re-install the receiver board in the reverse order.
(4)Remove the three screws on the left hand side.
(5) Disconnect the wire harness on the top side and then remove the two screws to release the emitter control board from the housing.
(6)Re-install the emitter board in the reverse order.
Service:
ALEW Direct always adhere to the product quality as the core, customer service as the purpose, if you have any questions or Suggestions in the process of using our products, you can contact me by email, I will give you a timely and satisfactory reply!

5. 4389102 Ice Maker Control Board Replacement Kit Emitter Board & Receiver Board, for Whirlpool Kenmore Maytag Emitter Sensor Refrigerators. Replaces PS557945, ADC9102, AP3137510

4389102 Ice Maker Control Board Replacement Kit Emitter Board & Receiver Board, for Whirlpool Kenmore Maytag Emitter Sensor Refrigerators. Replaces PS557945, ADC9102, AP3137510

Feature

6. The ERP 4389102 Refrigerator Control Board

The ERP 4389102 Refrigerator Control Board

Feature

Description

The ERP 4389102 Refrigerator Control Board works with the appliance’s ice maker to control the frequency with which the icemaker dumps the ice. This part can work with refrigerators from brands like Kenmore, KitchenAid, Whirlpool, Jenn-Air, Maytag, Dacor, and Thermador. The 4389102 can replace the following part numbers: W10757851, 2198585, 2198586, 2220398, 2220402, 2255114, 4388635, 4389102R, W10193666, W10193840, W10290817.

7. Edgewater Parts 4389102 W10757851 Ice Maker Control Board Kit Compatible with Whirlpool Emitter Sensor

Edgewater Parts 4389102 W10757851 Ice Maker Control Board Kit Compatible with Whirlpool Emitter Sensor

Feature

8. DIKOO 4389102 Refrigerator Ice Maker Sensor Control Board Kit for Whirlpool, Kenmore, Maytag, Kitchen Aid ReplacesW10757851 2198586 W10193840 ADC9102

DIKOO 4389102 Refrigerator Ice Maker Sensor Control Board Kit for Whirlpool, Kenmore, Maytag, Kitchen Aid ReplacesW10757851 2198586 W10193840 ADC9102

Feature

Description

4389102 Refrigerator Ice Maker Sensor Control Board Kit
This part fixes the following symptoms: Ice maker not making ice ; Ice maker won’t dispense ice ; Ice maker dispenses too much ice
This part works with the following brands:Kenmore, KitchenAid, Whirlpool, Jenn-Air, Maytag, Dacor, Thermador
Part Number 4389102 replaces: ADC9102 AP3137510 PS557945 PS10064583 2220398 2220402 W10193666 W10193840 2198585 2198586 2198588 2255114 W10290817 4388635 4389102 4389102R W10757851 AP595676 PS10064583 TJ4389102R.
Fits model: 10641522500, 10644022600, KSCS25FTMS01, KSCS25FTMS02 ,KSCS25FTSS00

Please note: All brand names and logos are registered trademarks of their respective owners.This is an DIKOO Brand replacement part, NOT an OEM and not affiliated with any brands product. All mentions of brand names or model descriptions are made solely for purposes of demonstrating compatibility.
Any warranties for this product are offered solely by DIKOO , not affiliated with any warranties offered by the original manufacturers.

Package including:
1*4389102 Ice Maker Sensor Control Board Kit

9. Supco ADC9102 Icemaker Control Board Replacement Kit, Replaces PS557945, 4389102, AP3137510

Supco ADC9102 Icemaker Control Board Replacement Kit, Replaces PS557945, 4389102, AP3137510

Feature

Description

Refrigerator Icemaker Control Board Replacement

This icemaker control board is a direct replacement for hundreds of OEM part numbers. This high-quality ice maker, Model No. ADC9102 is designed to meet or exceed OEM specifications and has wide application across many refrigerator models.

Product Features
Part No. ADC9102; Replaces some of the following Model Nos: AP3137510, PS557945, 4389102 and more.
Meets or Exceeds OEM Specifications
Compatible with Whirlpool, Maytag, Amana and SubZero.

About Supco

Founded in 1945 in the Bronx, NY by two naval engineers, Sealed Unit Parts Co.,Inc (SUPCO) originated as a service company for refrigeration systems. We bring continued product line expansion through in-house development, master distributor relationships, and acquisition. This strengthens our position as a leader in the HVAC, Refrigeration and Appliance industries.

10. SCOTSMAN 12-1912-01Circuit Board

SCOTSMAN 12-1912-01Circuit Board

Feature

Description

Product Description

12-1912-01, CIRCUIT BOARD. Scotsman Genuine OEM replacement part. Scotsman Ice Machines, a Warburg-Pincus brand, have a history of consistent innovation in ice maker parts and manufacturing. Use genuine OEM parts for safety reliability and performance.

From the Manufacturer

12-1912-01, CIRCUIT BOARD. Scotsman Genuine OEM replacement part. Scotsman Ice Machines, a Warburg-Pincus brand, have a history of consistent innovation in ice maker parts and manufacturing. Use genuine OEM parts for safety reliability and performance.

Conclusion

By our suggestions above, we hope that you can found Ice Maker Circuit Boards for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general