Top 10 Gas Appliance Connecting Kit

0

Nowadays, there are so many products of gas appliance connecting kit in the market and you are wondering to choose a best one.You have searched for gas appliance connecting kit in many merchants, compared about products prices & reviews before deciding to buy them.

You are in RIGHT PLACE.

Here are some of best sellings gas appliance connecting kit which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.

710 reviews analysed

1. Premium Steam-Dryer Installation Kit – Braided Stainless Steel, 6 ft

Premium Steam-Dryer Installation Kit - Braided Stainless Steel, 6 ft

Feature

Description

Stainless Steel Steam Dryer Installation Kit Includes Everything You Need To Install Your Steam Dryer-
6′ Hose (3/4″ FHT x 3/4″ FHT) with 90 Degree Elbow,
Inlet Adapter, “Y” Connector
1 Foot Feed Hose

2. Deflecto Easy Connecting Dryer Vent Hook Up Kit , Flexible Semi-Rigid Aluminum Duct, (HUPK8WA/4)

Deflecto Easy Connecting Dryer Vent Hook Up Kit , Flexible Semi-Rigid Aluminum Duct, (HUPK8WA/4)

Feature

3. BrassCraft CSSD114R-72 X Gas Appliance Connector

BrassCraft CSSD114R-72 X Gas Appliance Connector

Feature

Description

BrassCraft’s 3/8 In. Female Flare (1/2 In. MIP) EFV x 1/2 In. MIP x 72 In. Safety+PLUS Gas Appliance Connector is 1/2 In. OD (3/8 In. ID) with a maximum operating capacity of 49,100 BTU’s. This Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. BrassCraft’s stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.

4. Gas One Propane Adapter Hose 1lb to 20lb Converter – 16.4 oz or 1lb to 20 lb Premium Red Propane Tank Top Adapter CSA Certified QCC1/ Type 1 (4ft)

Gas One Propane Adapter Hose 1lb to 20lb Converter - 16.4 oz or 1lb to 20 lb Premium Red Propane Tank Top Adapter CSA Certified QCC1/ Type 1 (4ft)

Feature

Description

Specifications:

Product Length: 4 ft. (48”)
Product Weight: 8.8 oz
Inlet: Type 1 – QCC 1(ACME NUT)
Outlet: CGA600 Male
Converts: 1 lb – 20 lb Propane tanks.

Description:

– Use a 20lb Propane Tank with Your 1lb Propane Regulator!
– Save Space and the need for Waste by using Larger Tanks
– Made to last with high quality materials
– Simple Installation with no tools required
– Used for a Variety of Propane Appliances

5. GASPRO 12FT Natural Gas Hose with Quick Connect Fittings, 3/8 Inch Propane/Natural Gas Quick Disconnect Kit Extension Hose Assembly for Low Pressure Appliance, CSA Certified

GASPRO 12FT Natural Gas Hose with Quick Connect Fittings, 3/8 Inch Propane/Natural Gas Quick Disconnect Kit Extension Hose Assembly for Low Pressure Appliance, CSA Certified

Feature

Description

End Connector- One end of the hose has the male quick release interconnect. The other end has a female flare thread.

Product Specification
Gases Type: NG/LPG
Inlet Pressure:1/2PSIG
Inlet Connector:3/8’’NPT
Outlet Connector:5/8’’-18 UNF
Certificate: CSA
Hose Length:12feet/144inch
Apply to: Gas grill, heater, fire pit and more

The hose used for a LP to NG conversion. The fittings are high quality. Connecting and disconnecting the quick disconnect is easy.

6. Flextron FTGC-YC34-36P 36" Flexible Yellow Epoxy Coated Gas Line Connector with 1" Outer Diameter and 3/4" FIP x 3/4" MIP Fittings, Stainless Steel

Flextron FTGC-YC34-36P 36" Flexible Yellow Epoxy Coated Gas Line Connector with 1" Outer Diameter and 3/4" FIP x 3/4" MIP Fittings, Stainless Steel

Feature

Description

Size:36 Inches

This is a Flextron gas connector from their YC34 series of connectors, which is designed for indoor and is designed as part of a tank less water heater or -valve kit. it has an outer diameter of 1" and an inner diameter of 3/4" and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. the coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. on the ends of this 36" long connecter are a 3/4" fip and a 3/4" mip fitting, made of zinc-plated stainless steel type s45c. the connector is rated for use in the temperature range of -40 f to 150 f and it is certified by csa for use up to a pressure of 0.5 psi. please consult the product information for the flow capacity for this part, for natural gas. the part is certified by commonwealth of Massachusetts, the city of new York and by upc and csa for meeting the amse A112.18.6 and ansi Z21.24, Z21.69 and Z21.75 gas appliances and manufactured homes standards. each connector is 100% tested on leaks before it leaves the factory. the design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. it can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. its flared end fittings result in a metal to metal seal, which is tested to be leak free within a tighten torque of 1040 inch-pounds. the connector can handle external temperatures of 800 f.

7. GASPRO 24 Feet 1/2" ID Natural Gas Hose, Propane Gas Grill Quick Connect/Disconnect Hose Assembly with 3/8" Female Flare by 1/2" Male Flare Adapter for Outdoor NG/Propane Appliance

GASPRO 24 Feet 1/2" ID Natural Gas Hose, Propane Gas Grill Quick Connect/Disconnect Hose Assembly with 3/8" Female Flare by 1/2" Male Flare Adapter for Outdoor NG/Propane Appliance

Feature

Description

Size:24FEET

This 24′ Natural Gas Hose has a 1/2″ female pipe thread x 1/2″ male flare quick connect/disconnect with dust plug and cap.

The included 3/8″ Female Flare by 1/2″ Male Flare Brass Adapter can be used to convert NG to standard LP gas appliance.

Specification:

Max Working Pressure :1/2 PSIG

Flow Capacity :100000 BTU/hr

Inlet Diameter : 1/2″ NPT

Outlet Diameter :3/4″-16UNF

Hose Length: 24feet/288inch

Certificate :CSA

8. SHINESTAR 6FT Stainless Braided Propane Hose Adapter with Propane Tank Gauge, 1lb to 20lb Propane Converter Hose for Propane Stove, Tabletop Grill and More 1lb Portable Appliance

SHINESTAR 6FT Stainless Braided Propane Hose Adapter with Propane Tank Gauge, 1lb to 20lb Propane Converter Hose for Propane Stove, Tabletop Grill and More 1lb Portable Appliance

Feature

9. SHINESTAR 5FT Braided Propane Hose Connects 1lb Portable Appliances to 5-40 lb Propane Tank, for Small Grill, Fire Pit, etc

SHINESTAR 5FT Braided Propane Hose Connects 1lb Portable Appliances to 5-40 lb Propane Tank, for Small Grill, Fire Pit, etc

Feature

Description

SHINESTAR braided stainless steel material more durable than rubber hose
To prevent animals are bite your hose, such as cats, dogs, raccoons, and chipmunks.

The hose adapter fit for all portable appliance that use 1lb cylinder
Replacement for Weber q grill, Coleman Propane Stove and more portable devices.

Saving money and giving you the choice between 16.4 oz tank and a 20lb tank
If you want to use a larger propane tank on your tabletop grill, you can choose this 1lb to 20lb hose adapter.

Product Specification
Gas type: LP/LPG
Inlet Pressure:25-250PSI
Length: 5 feet /60 inch
Material: Stainless steel braided

WARNING INFORMATIONS
1. For your safety ALL propane appliances are OUTDOOR Use.
2. FULLY TIGHTENED at both propane tank side and grill side before using on your propane appliances to prevent leakage.
3.Pay attention of the sharp edges when unpackaging and installing, better wear gloves.

10. 4 Pieces RV Propane Quick Connecting Adapter 1/4 Inch Shutoff Valve and Full Flow Plug for Propane Hose Hex Nipple Coupling Coupler Air Hose Fitting Brass Pipe Fitting 1/4 x 1/4 Inch NPT Female Pipe

4 Pieces RV Propane Quick Connecting Adapter 1/4 Inch Shutoff Valve and Full Flow Plug for Propane Hose Hex Nipple Coupling Coupler Air Hose Fitting Brass Pipe Fitting 1/4 x 1/4 Inch NPT Female Pipe

Feature

Description

Feature:

Solid brass material:
These pipe fitting and quick coupler are made of solid brass material, corrosion resistance, not easy to break and deform, durable for you to use, can keep tools work safely at high temperatures, have long service time.

Convenient for your outdoor barbecue and picnic:
The kit is convenient and practical for your outdoor barbecue and picnic, the quick coupler can let you use a propane supply on a RV camper or trailer and the pipe fitting is convenient to connect 2 pipes going in the same direction with the same diameter to extend pipe length.

Tighter seal and safer:
The female NPT threads for connecting to male threaded pipes proviede a tighter seal.

Specification:

Quick connecting kit:
Includes: 1 x shutoff valve and 1 x full flow plug
Shutoff valve: 1/4 inch female NPT x 1/4 inch female quick connecting
Full flow plug: 1/4 inch male NPT x 1/4 inch male quick connecting
Material: brass
Pressure: low pressure propane system

Brass coupling:
Features: 1/4 inch NPT male x 1/4 inch NPT female
Material: brass
Operate temperature: -53 to 121 °C / -65 to 250 °F

Hex nipple:
Features: 1/4 inch NPT male x 1/4 inch NPT female
Material: brass
Working temperature: -50 to 120 °C / -60 to 250 °F
Pressure Resistance : 0 to 1.6 Mpa

Package includes:
1 x Shutoff valve
1 x Full flow plug
1 x Brass pipe coupling
1 x Hex nipple fitting

Conclusion

By our suggestions above, we hope that you can found Gas Appliance Connecting Kit for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general