We spent many hours on research to finding appliance regulator, reading product features, product specifications for this guide. For those of you who wish to the best appliance regulator, you should not miss this article. appliance regulator coming in a variety of types but also different price range. The following is the top 10 appliance regulator by our suggestions
746 reviews analysed
1. Maxitrol RV48L Natural Gas Pressure Regulator, 1" In and Out Opening, 3/4" FPT Thread,1/2 PSIG Inlet Pressure, 3"-6" WC Outlet Pressure
Feature
- GAS TYPE & PRESSURE – Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3″ – 6″ Water Column
- PIPE THREAD SIZE – 3/4″ Inlet & 3/4″ Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 1 inch as shown in the picture’s table.
- CAUTION – This regulator has 1″ openings for 3/4″ gas pipes. The 3/4″ gas pipe means interior diameter 3/4″ but outside diameter is 1″, refer to the pictures before buying.
- MARKING – Model: RV48L, Marking: 1/2 PSIG, Po 3″ – 6″. Inlet pressure 1/2 PSI. Adjustable outlet pressure 3″-6″ Water Column.
- OPERATE TEMPERATURE – 32°F – 225°F (0°C – 107°C), Indoor Only, Not for outdoor usage. Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator.
Description
Maxitrol Pressure Regulator for Natural Gas (NG)
Product Description:
- Brand: Maxitrol
- Gas type: Natural Gas (NG)
- Refer to the pictures on how to find the correct pipe thread size. This regulator has 1″ openings for 3/4″ gas pipes. 3/4″ IN and 3/4″ OUT Female Pipe Thread. The 3/4″ gas pipe means interior diameter 3/4″ but outside diameter is 1″, refer to the pictures before buying.
- Inlet pressure (CSA rated and Maximum operating): 1/2 PSI (34 mbar).
- Outlet pressure range: 3” – 6” Water Column
- Ambient operating temperature range: 32°F – 225°F (0°C – 107°C).
Attention:
- NOTE: GAS PRESSURE REGURATORS WILL NOT TURN OFF THE FLOW OF GAS.
- The pipe fittings for this regulator are based on NPT pipe threads – dimensions according ANSI/ASME B1.20.1 standards.
- Install the regulator properly with gas flowing as indicated by the arrow on the casting.
- *NOTE – Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator.
How to find the correct pipe thread size
- WARNING: The NPT thread size is NOT referring to the size of the thread itself!
- The plumbing industry standard for the pipe sizes is NOT always as straightforward as measuring the pipe.
- Measuring the pipe will often mislead you into choosing the wrong pipe size.
- The “pipe thread size” is measured and based on the inside of the pipe.
- A lot of people measured the thread / the opening for the thread / outside diameter of the pipe, and thought that was the thread size. It was WRONG.
- The NPT thread is referring to the Interior Diameter of the pipe.
2. WOLF 1/2" NPT Natural Gas Pressure Regulator 3" to 6" water column range 712371
3. Dormont R48N42-0306-3.5 2500 Natural Gas Regulator, 3/4" Diameter
Description
Dormont R48N42-0306-3.5 2500 Natural Gas Regulator, 3/4″ Diameter. Genuine OEM replacement part. Dormont offers a full range of solutions for all your gas connectivity applications. Use genuine OEM parts for safety reliability and performance.
4. MAXITROL 325-3L (1/2" W/12A09) Regulator,Gas Pressure
Description
Industry Standard
5. Maxitrol Pressure Regulator for Liquid Propane Gas (LP), 3/4" In and 3/4" Out FPT Gas Pipe,1/2 PSIG, 5" – 12" WC, RV48L
Feature
- GAS TYPE & PRESSURE – Gas Type: Propane Gas (LP). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 5″ – 12″ Water Column
- PIPE THREAD SIZE – 3/4″ Inlet & 3/4″ Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 1 inch as shown in the picture’s table.
- CAUTION – This regulator has 1″ openings for 3/4″ gas pipes. The 3/4″ gas pipe means interior diameter 3/4″ but outside diameter is 1″, refer to the pictures before buying.
- MARKING – Model: RV48L, Marking: 1/2 PSIG, Po 5″ – 12″. Inlet pressure 1/2 PSI. Adjustable outlet pressure 5″-12″ Water Column.
- OPERATE TEMPERATURE – 32°F – 225°F (0°C – 107°C). Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator.
Description
Maxitrol Pressure Regulator for Propane Gas (LP)
Product Description:
- Brand: Maxitrol
- Gas type: Propane Gas (LP)
- Refer to the pictures on how to find the correct pipe thread size. This regulator has 1″ openings for 3/4″ gas pipes. 3/4″ IN and 3/4″ OUT Female Pipe Thread. The 3/4″ gas pipe means interior diameter 3/4″ but outside diameter is 1″, refer to the pictures before buying.
- Inlet pressure (CSA rated and Maximum operating): 1/2 PSI (34 mbar).
- Outlet pressure range: 5” – 12” Water Column
- Ambient operating temperature range: 32°F – 225°F (0°C – 107°C).
Attention:
- NOTE: GAS PRESSURE REGULATORS WILL NOT TURN OFF THE FLOW OF GAS.
- CAUTION: Never connect regulator directly to the propane supply source. Maxitrol regulators require an external regulator (NOT supplied). Install the external regulator between the propane supply source and Maxitrol regulator.
- Install the regulator properly with gas flowing as indicated by the arrow on the casting.
- *NOTE – Do not install the regulator too close to the heating equipment or use in very cold environment.
How to find the correct pipe thread size
- WARNING: The NPT thread size is NOT referring to the size of the thread itself!
- The plumbing industry standard for the pipe sizes is NOT always as straightforward as measuring the pipe.
- Measuring the pipe will often mislead you into choosing the wrong pipe size.
- The “pipe thread size” is measured and based on the inside of the pipe.
- A lot of people measured the thread / the opening for the thread / outside diameter of the pipe, and thought that was the thread size. It was WRONG.
6. MAXITROL 325-3 Gas Regulator
Description
Maxitrol’s 325 series pounds to inches regulators are for use on residential, commercial, and industrial applications. The 325 Series features a high leverage valve linkage assembly to deliver positive dead-end lockup. The regulators are capable of precise control from full flow down to pilot flow.
7. MENSI 3/8" NPT Regulator For NG Gas NPT Natural Gas Low Pressure Regulator 5" water column range
Description
Low Pressure Regulator 30000BTU/hr 3/8″ NPT NG regulator 5″ Outlet pressure
8. Dormont RV48CL-32 Convertible Regulator Gas 1/2-inch
9. anmas rucci 102-B Gas Pipe in/Out,1/2" PSI (3.5KPa) LPG 10" W. C & NG 5" W. C Natural Gas Pressure Regulator
Description
Product Description:
-Gas type: Natural gas/LPG.
-Size: 102-B Gas Pipe In/out
-PSI: 1/2" (3.5KPa)
-Type: RTZ-ED
-Suit for LPG 10" W. C & NG 5" W. C
Attention:
-The pipe fittings for this regulator are based on NPT pipe threads – dimensions according ANSI/ASME B1.20.1 standards.
-Pipe sizes do not refer to any physical dimensions.
-Applicable to: American Range Bakers Pride Oven Where Applicable.
Package:
1* gas regulator
10. Aupoko 3/8" Gas Regulator, Natural Gas Grill Low Pressure Regulator, 3/8" -18 NPT Natural Gas Pressure Regulator, Fits for NG Gas NPT Natural Gas Low Pressure Regulator with Gas Line Pipe Thread Tape
Feature
- WIDE COMPATIBLITY —- 3/8″ natural gas regulator for grill can be used for LP fire pit to NG, gs NPT natural.
- PREMIUM QUALITY —- Natural gas pressure regulator is made of high quality metal material, to ensure long-lasting and durable to use and protect from leakage for safety.
- EASY TO INSTALL —- Natural gas regulator is easy to install, just install the regulator properly with gas flowing as indicated by the arrow on the casting, also with gas line pipe thread tape for convenient install.
- WARM TIPS —- Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator. And the gas pressure regulator will not turn off the flow of gas.
- 1 YEAR WARRANTY —- Order natural gas pressure regulator from Aupoko, we can provide 12 months free-worry warranty, should be there any question, please feel free to contact us.
Description
Specifications:
Gas type: Natural Gas (NG)
Outlet pressure: 5″
Inlet pressure: (NG) 7″
Flow Capacity:30000 BTU/hr
Inlet and Outlet Diameter: 3/8″ -18 NPT
CERTIFICATE: CSA CE
Completed with 1Pc Gas Line Pipe Thread Tape
NOTE:
Gas pressure regulator will not turn off the flow of gas.
The pipe fittings for this regulator are based on NPT pipe threads-dimensions according ANSI/ASME B1.20.1 standards.
Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator.
Package Included:
1 Pc x 3/8″ NPT Low Pressure NG Regulator
1 Pc x Gas Line Pipe Thread Tape
Conclusion
By our suggestions above, we hope that you can found Appliance Regulator for you.Please don’t forget to share your experience by comment in this post. Thank you!
